K&K International 

Technical information

K & K International has released technical specifications and user manuals on this web site.

 

P630 Pro Ver. 1.3d

Test modes in Run-mode:

Channel A & A2 Channel B & B2 Channel C & C2 Channel D & D2
Frequency Response Frequency response ** Impedance Frequency response **
Polarity Rub & Buzz Resonance (Fo) Rub & Buzz
2. Frequency Responce THD * Qms, Qts THD *
3. Frequency Responce   F (resonance frequency span)  
Sensitivity (ref. freq limits) with move option   EBP  
Sensitivity 1 (1 test point)   Current Distortion  
Sensitivity 2 (1 test point)      
Sensitivity 3 (1 test point)      
Sensitivity 4 (1 test point)      
Sensitivity 5 (1 test point)      
Frequency Average (specified frequency range)      
Frequency Group Limit      
Frequency Average 1  (2-5 test points)      
Frequency Average 2  (2-5 test points)      
Loudness
Phase (of Frequency Responce) * Phase (of Frequency Responce) *   Phase (of Frequency Responce) *
BL (coil center offset) * BL (coil center offset) * BL (coil center offset) * BL (coil center offset) *
Ambient Noise Check * Ambient Noise Check *   Ambient Noise Check *

* can only be displayed in one channel at same time
** if frequency responce are used (in Ch B/D) Rub & buzz is disabled

 

 


P522 compare table.
P530 compare table.

Go to download user manuals.

  P630 Pro V1.3d P830 P730 Picro Pro P730 Picro Std
Analysing channels: A, B, C, D, A2, B2, C2 & D2 A, B, C & D A, B, C & D A, B, C & D
Sweep frequency: 5 - 30 kHz 20 - 22 kHz 20 - 20 kHz 20 - 20 kHz
Sweep time: Programmable Programmable Programmable Programmable
No. filters: 4 2 2 2
Filter types: TRK-BP, TRK-HP
or FIX-HP		 TRK-HP (2-12 har.) 
or  FIX-HP		 TRK-HP (2-12 har.) 
or  FIX-HP		 TRK-HP (2-5 har.)
Filter frequency: 5 - 45 kHz 40 - 18 KHz / 40 KHz 40 - 18 kHz 40 - 18 kHz
Sample frequency 96.0  KHz 44.1 - 48.0 - 88.2 - 96.0 -
192 KHz		 44.1 - 48.0  KHz 44.1 - 48.0  KHz
A/D resolution 24 bit 24 bit 24 bit 24 bit
System multiplexer: Built-in None None None
I/O functions: Built-in External External None
Output Amplifier: Built-in and/or external
15 or 20 Volt rms.		 External External  External
Total test time
All test made with a 3 GHz PC		 Incl. R & B
Channel:
A, B, C, D
Exc. R&B
Channel:		 Incl. R&B
Channel:
A, B, C, D A, B, C, D
Exc. R&B
Channel:		 Incl. R&B
Channel:
A, B, C, D A, B, C, D
Exc. R&B
Channel:		 Incl. R&B
Channel:
A, B, C, D A, B, C, D
250 test points:        
20 - 20 kHz
40 - 20 kHz
100 - 20 kHz
Times in ( ) is min. sweep time		 Less than 1.5 (0.5) sec.
Less than 1.1 (0.5) sec.
Less than 0.6 (0.1) sec.
2.6 (2.5) sec.
2.1 (2.0) sec.
1.6 (1.5) sec.
1.6 (1.5) sec.		 4.1 (4.0) sec.
3.1 (3.0) sec.
2.1 (2.0) sec.
2.1 (2.0) sec.
2.8 (2.5) sec.
2.2 (2.0) sec.
1.7 (1.5) sec.
1.7 (1.5) sec.		 5.2 (5.0) sec.
4.2 (4.0) sec.
2.2 (2.0) sec.
2.2 (2.0) sec.
3.3 (3.0) sec.
2.7 (2.5) sec.
2.2 (2.0) sec.
2.2 (2.0) sec.		 6.2 (6.0) sec.
5.2 (5.0) sec
4.2 (4.0) sec.
4.3 (4.0) sec.
250 test points &
Pre Amp (GCA):		        
20 - 20 kHz
40 - 20 kHz
100 - 20 kHz
500 - 20 kHz
Tested with a 3.0 GHz PC,
SF = 96 KHz
Times in ( ) is min. sweep time		  
2.6 (2.5) sec.
2.1 (2.0) sec.
1.6 (1.5) sec.
1.1 (1.0) sec.		 2.6 (2.5) sec.
2.1 (2.0) sec.
1.6 (1.5) sec.
1.1 (1.0) sec.
2.8 (2.5) sec.
2.2 (2.0) sec.
1.7 (1.5) sec.
1.2 (1.0) sec.		 4.2 (4.0) sec.
3.2 (3.0) sec.
2.0 (1.8) sec.
1.2 (1.0) sec.
  
PC requirements  > 2,6  GHz. 1 GB RAM, FSB >= 400 MHz  > 2.0  GHz
 		 > 2.0  GHz
 		 > 2.0  GHz


The main differences between the P530, P530LT, P530 Micro.

P530 P530 P530LT & P530 Micro
Analysing channels: A, B, C & D A, B, C & D
Sweep frequency: 10 - 30 kHz 20 - 20 kHz
Sweep time: Programmable Fixed (see test time below)
No. of R & B filters: Up to 3 2
Filter types: TRK-BP, TRK-HP
or FIX-HP		 TRK-HP or FIX-HP
Filter frequency: 20 - 45 kHz 40 - 18 kHz
System multiplexer: Built-in LT: Built-in     Micro: Supported by sw
I/O functions: Built-in LT: Optional   Micro: Supported by sw
Output Amplifier: Built-in LT: Built-in     Micro: 2.3 Volt 
Resolution full scale:
     at -80 dB
     at -90 dB		 0.02 dB
0.02 dB
0.02 dB		 0.01 dB
1.5   dB
6      dB
Total test time
 Incl. R & B
Channel:
A, B, C, D
Exc. R&B
Channel:
A A, C
Incl. R&B
Channel:
A, B A, B, C, D
250 test points:    
20 - 20 kHz
40 - 20 kHz
100 - 20 kHz		 Less than 1.6 sec.
Less than 1.1 sec.
Less than 0.7 sec.
2.6 sec.
1.8 sec.
1.1 sec.		 4.6 sec.
2.4 sec.
1.6 sec.		 5.7 sec.
3.4 sec.
1.8 sec.		 7.2 sec.
4.2 sec.
2.4 sec.
125 test points:    
20 - 20 kHz
40 - 20 kHz
100 - 20 kHz		 Less than 1.0 sec.
Less than 0.8 sec.
Less than 0.5 sec.
1.3 sec.
0.9 sec.
0.7 sec.		 2.4 sec.
1.5 sec.
1.0 sec.		 2.6 sec.
1.7 sec.
1.0 sec.		 3.6 sec.
2.3 sec.
1.4 sec.
62 test points:    
20 - 20 kHz
40 - 20 kHz
100 - 20 kHz		 Less than 0.9 sec.
Less than 0.7 sec.
Less than 0.4 sec.
0.9 sec.
0.7 sec.
0.6 sec.		 1.3 sec.
1.0 sec.
0.8 sec.		 1.6 sec.
1.1 sec.
0.7 sec.		 2.1 sec.
1.4 sec.
0.8 sec.
PC requirements 1.333  GHz or higher
Min. 128 MB RAM
Win 98/ME/NT/2000/XP
Test results at 1333 MHz		 1.333  GHz or higher
Min. 128 MB RAM
Win 98/ME/NT/2000/XP
Test results at 1800 MHz


The main differences between the P522, P522LT and P522 Micro are listed below.

P522  P522 P522LT & P522 Micro
Analysing channels: A, B, C & D A, B, C & D
Sweep frequency: 10 - 30 kHz 20 - 20 kHz
Sweep time: Programmable Fixed (see test time below)
No. of R & B filters: Up to 3 2
Filter types: TRK-BP, TRK-HP
or FIX-HP		 TRK-HP or FIX-HP
Filter frequency: 20 - 45 kHz 40 - 18 kHz
System multiplexer: Built-in LT: Built-in     Micro: Supported by sw
I/O functions: Built-in LT: Optional   Micro: Supported by sw
Output Amplifier: Built-in LT: Built-in     Micro: 2.3 Volt 
Resolution full scale:
     at -80 dB
     at -90 dB		 0.02 dB
0.02 dB
0.02 dB		 0.01 dB
1.5   dB
6      dB
Total test time

 Incl. R & B
Channel:
A, B, C, D
Exc. R&B
Channel:
A A, C
Incl. R&B
Channel:
A, B A, B, C, D
250 test points:    
20 - 20 kHz
40 - 20 kHz
100 - 20 kHz		 Less than 2 sec.
Less than 1.5 sec.
Less than 0.9 sec.
2.3 sec.
1.5 sec.
0.8 sec.		 4.4 sec.
2.6 sec.
1.4 sec.		 5.7 sec.
3.4 sec.
1.8 sec.		 9.1 sec.
6.2 sec.
2.9 sec.
125 test points:    
20 - 20 kHz
40 - 20 kHz
100 - 20 kHz		 Less than 1.9 sec.
Less than 1.4 sec.
Less than 0.9 sec.
1.2 sec.
0.8 sec.
0.5 sec.		 2.3 sec.
1.4 sec.
0.8 sec.		 3.2 sec.
1.8 sec.
0.9 sec.		 4.7 sec.
2.8 sec.
1.5 sec.
62 test points:    
20 - 20 kHz
40 - 20 kHz
100 - 20 kHz		 Less than 1.5 sec.
Less than 1.3 sec.
Less than 0.8 sec.
0.8 sec.
0.5 sec.
0.4 sec.		 1.3 sec.
0.8 sec.
0.5 sec.		 1.6 sec.
1.0 sec.
0.6 sec.		 2.5 sec.
1.4 sec.
0.8 sec.
PC requirements 486, 66 MHz or higher. Min. 4 MB RAM, Win 95/98 (DOS)
Test results at 300 MHz		 Pentium 300 MHz or higher
Min. 32 MB RAM
Win 95/98 (DOS)
Test results at 300 MHz

Data can be changed without further notice.